WTUSBDM_ARM_JS low cost Freescale 08/12/CF1/ARM programming / debugging tool

Out of stock

SKU: WTUSBDM_ARM_JS Category: Tags: , , , ,


The WTUSBDM_ARM_JS is a low cost Freescale microcontroller programming / debugging tools supporting the S08, S12 and CFV1 and ARM devices.  Now shipping with version #4.12.3.

  • A single BDM interface for programming and debugging of the following targets:
    • HCS12 (including those without SYNC feature (e.g. 9S12DP256B)
    • HCS08
    • Coldfire V1 microcontrollers
    • Kinetis ARM-Cortex microcontrollers

Compatible IDEs:

  • Codewarrior V10.x (Eclipse version)
  • Codewarrior Legacy versions
  • Codewarrior Development Studio for HCS12(X) V5.1 & CW for Microcontrollers V6.3
  • Initial support for CodeSourcery Lite for Coldfire
  • Trimming of target internal clock (Eclipse version or standalone programming tools only).
  • Higher USB communication speed
  • Vista compatible
  • Linux compatible
  • The Firmware in the BDM may be automatically updated using an in-circuit-programming (ICP) feature.
  • HCS12, HCS08, Coldfire V1 specific features:
  • Target reset detection & control (required for HC12 processors). This allows HC12 processors to be reset into BDM mode as required for debugging.
  • A higher BDM interface speed than the existing JB16 OSBDMs. Up to 56MHz. (BDM clock 28MHz).
  • Automatic re-connection. The software has an option to continuously update the interface speed to prevent loss of communication if the target BDM interface speed changes (as may occur with clock changes on some targets).
  • Control of BDM clock selection in HC12/HCS08/Coldfire microcontrollers. Most of these targets provide an alternative BDM clock selection. This can have advantages when connecting to high speed targets as the alternative clock may operate at a lower speed.
  • manual selection of 3.3V and 5V target supply
  • Trial-and-error determination of communication speed for earlier HC12 targets.
  • User prompting for target supply cycling with BKGD low as may be needed for HCS08 targets

Note: this device does not support the programming of the RS08 devices due to a limitation of the RS08 microcontroller.

You can get the classic Codewarrior v6.3.2 that will install on a Windows 7/10 machine here:

  • Qty discounts*:
  • 10 to 49 = 10% off
  • 50 to 99 = 15% off
  • 100+ = 20% off

*Discount will show in cart

Additional information

Weight 0.6 lbs
Dimensions 5 × 3 × 0.75 in

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.




Continue as a Guest

Don't have an account? Sign Up

Product Enquiry